The Content Filter can be administered by the admin using the web-based interface.

Workstation allows pass through mode with administrator password.

The options are: Override Mode can be enabled from HQ Toolbar, Disable Web Filtering from within HQ Toolbar, Shutdown CyberPatrol.

Filter can be turned off with a user name and password. Users can request this login from librarians. Librarians can set up the username(s) and password(s)in advance, and modify anytime. They can also set up length of the filter-off session.

Simply make inactive

Can be done in tools, internet options, connections, and turn off the proxy

Filtering can not be deactivated at the workstation. This must be done at one or more management consoles (not web-based so must install on select servers). However, the process required to do so is trivial. Account-level blocking can be used in additi

Filtering can be turned on or off remotely by a librarian. Libraries can opt to offer unfiltered access for authorized users for anonymous browsing. Authorized end-users can also disable filtering themselves.

Password-protected access to entire AdultFilter control-panel.

password overide option

n/a

Users can request an override via link provided. They can also be given a password to override sites themselves.

Administrator right clicks on the icon and enters their password and disables the program

It can be turned off by IP address or by user id. A timed override can be given to the user.

no one can access the filter without a password. if that user has a password they will be able to see the gui interface and make cahnges.

Any authorized person logs onto a web based admin page from any workstation with Internet access and turns off the filter for a specific station for a given time. An authorized user uses a password to enable this function and the system returns to the def

Administrator uses web interface to allow site for a short period/forever/just for this workstation

Admin can give override accounts to users based on local authentication, NT or Active Directory. It is also possible to set IP or user based accounts which override filtering.

Librarian enters user name, password and time length of disabling into user workstation.

The administrator must modify the user profile.

When a website is blocked, the user can click on override (bypass).

none

none

none

No

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

No

Yes

Yes

Yes

Yes

n/a

Administrator can either recategorize the blocked page, grant the user the rights to override in that category, user can request recategorization of website; whereby the admin can accept or reject sumitted website.

The options are: Instant Override link on webpage (PW or Warn Only), Override Mode can be enabled from HQ Toolbar, disable filtering by web category, Add Site/URL Keyword(s) as Allowed for immediate override, Shutdown CyberPatrol.

Users can ask to bypass blocked page. They are given a prompt to enter password. Staff can either provide them with a password to use or enter their override password. Specifc websites can also be added to trusted site list by admin.

Add the page to the allowable list

Create new block page and place it on web site. Change URL to block page in CF Configuration

A single *domain* could be allowed by the administrator but not at the page level. Must be done at management console.

Blocked pages can be overridden remotely by a librarian, temporarily for a user or permanently for all users. Authorized end-users can override individual blocked pages themselves, or they can discontinue filtering altogether for their current session.

Add URL to the (password-protected) white list.

policy-based overide

n/a

Admin receives request from user and can override the block (for that site or the entire category) for that user or for everyone and can also specify the amount of time the override will work

Administrators can add the site to the override list.

The administrator can view the banned results and then, through the administration setup, choose to add an override for the result.

you may give passwords out to end users to allow the user to get to the specific site in question

Authorized person accesses the web admin and overrides the page outright or for a given time or for a reoccurring time frame OR an authorized user can click on the DISABLE FILTER button on the Deny Page then enter a user name and password to override.

Administrator visits page then clicks on Add To Allowed and is prompted for a password.

Admin can give override accounts to users based on local authentication, NT or Active Directory. It is also possible to set IP or user based accounts which override filtering.

Overriding of the filtering is all or nothing at an individual workstations, and cannot be done for a single page or URL, but erroneously blocked site can be added to Never Block list.

Modify the user profile or use another user profile.

type url into the administration page.

none

The password override feature lets users with valid passwords access sites blocked by Websense. Password override can be granted to individual users, groups, workstations, or networks (IP address ranges). When password override is activated for a user

none

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

No

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

No

Yes

Yes

Yes

Yes

The Content Filter can be administered by the admin using the web-based interface and the rule can have a time schedule.

Just right click the system tray icon and choose Disable the filter. Will automaticaly be enabled on reboot.

Can configure via the time management feature.

There is one setting for the period of time. Just type in the time length.

Select period of inactivity

Same as above-set timings for periods of time-schedule this

Filtering profiles can be associated with a schedule so that (for example), public computers could be set to filter as Adult-Filtered until 2pm at which point the filter profile changes to Youth-Filtered.

1. While a user is logged in they can click for filtered or unfiltered access during their session. 2. The software can also provide filtering based on a number of minutes; for example 10 minutes unfiltered, 20 minutes filtered.

cannot

policy-based time of day option

n/a

Admin receives request from user and can override the block (for that site or the entire category) for that user or for everyone and can also specify the amount of time the override will work

Admin can turn program off with password and then turn back on with password

The administrator can turn off filtering for a class of users or disable filtering for all users through the administration interface.

you may allow all sites for users or unplug the network cable.

Authorized person accesses the web admin and turns off the filter outright or for a single user or group(s), or an IP or group(s) of IPs for a given time or for a reoccurring time frame

Administrator logs into web based config page and unticks enable blocking then clicks save and restart the guardian proxy, this normally takes about 5 seconds.

GUI offers on/off option as well as ability to set filtering levels based on time periods.

Librarian enters user name, password and time length of disabling into user workstation.

none

Click off a button and filter is off. There is an option setting Only the administrater can do this or the end user can do this as well.

none

The filtering options can be modified by time of day.

none

If a user has rights to override a Web page, they must supply their password. If they do not have override rights, they can sumbit a site to the administrator. Overriden Web pages are recorded if logging is enabled.

All override options are applied immediately by the Administrator and no restarting of the PC is required.

CyberSetting provides many options for overriding.

Many of the No answers above have to do with the DTR technology. Infon on DTR can be provided upon request.

When filtering is turned off on a workstation, no logging of any kind of done at that machine.

Very simple to operate from a standard Internet Browser. Can be set up to allow users to unblock for themselves. Full override capabilities require installation of latest CybraryN software.

If the Adult filter is temporarily deactivated by the administator and the machine is shutdown without reactivating the filter then it will automatically re-activate upon the next restart.

We offer additional control with abuse detection and enforcement of safe search

Override capabilities can be distributed to 4 levels of administration. This includes allowing selected staff and/or patrons to disable filtering with a user name and password.

Overrides can be added also from the log viewer pages.

Click on a button and filter is on. There is an option setting Only the administrater can do this or the end user can do this as well.

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

Vendor Supplied

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008

09/29/2008